In Finite Element Analysis, it is typical to wait during the calculation process. On the one hand, computers have become more and more powerful over the last decade, resulting in a reduction calculation time. But on the other hand, the user already has several tools to improve processing speed in some cases.

CATIA V5 allows the user to perform Finite Element Analysis (FEA) using Generative Structural Analysis (GSA). This workbench is useful for analysis with 3D geometry, and in some cases (sheet metal, constant thickness parts, axisymmetric products, etc…) 2D can be used with the advanced meshing tool workbench.

This example is based on a simple sheet metal part with 2mm thickness.

CATIA V5 2D Advanced Meshing

Based on this 3D part, a mid plane surface has been created with extract (Insert > Operation > Extract CATIA V5 2D Advanced Meshing) and offset (Insert > Surfaces > Offset CATIA V5 2D Advanced Meshing) tool in the Generative Shape Design workbench.

CATIA V5 2D Advanced Meshing 4

Now we can launch the Advance Meshing Tools workbench, select the analysis type (in this example it is a static analysis) and press OK. Select Advance Surface Mesher (CATIA V5 2D Advanced Meshing 5) in the surface mesher toolset icons, click on the surface(s) and fill mesh size and sag. Be aware of the min hole size, this option would supress any hole(s) below the diameter entered in the window, leaving “0mm” will keep every holes features.

CATIA V5 2D Advanced Meshing 6

An example 2D shape can be seen below. As you can see, you are now in the meshing editor workbench, where you can refine, transform or change element type.

CATIA V5 2D Advanced Meshing 7

In this example we will just mesh the part (CATIA V5 2D Advanced Meshing 8). A window will open with all the mesh info, number of nodes, elements, etc… you can now exit this workbench CATIA V5 2D Advanced Meshing 9:

CATIA V5 2D Advanced Meshing 10

Now the part is ready for the Generative Structural Analysis workbench. If your mesh does not appear, right click in the tree on Node and element > Mesh visualisation. Now as a usual 3D part, apply material, boundary conditions and loads. Unlike with the 3D part, you must apply a 2D properties (CATIA V5 2D Advanced Meshing 11) to your part.

CATIA V5 2D Advanced Meshing 12

When your model is ready for analysis, your construction tree and model will look populated like the example below. You can then click on compute icon (CATIA V5 2D Advanced Meshing 13):

CATIA V5 2D Advanced Meshing 14

Next you can extract the relevant values from your analysis, for example maximum stress and displacement.

CATIA V5 2D Advanced Meshing 15

Now let’s compare 2D vs 3D in terms of computation time with the same element size, sag, loads and boundary conditions.

CATIA V5 2D Advanced Meshing 16

CATIA V5 2D Advanced Meshing 17