A Step Closer to Reality with SIMULIA

TECHNIA offers simulation solutions for additive manufacturing. The importance of the additive manufacturing process – often referred to as 3D printing – for product development and manufacturing has increased enormously over the last few years.

Post-Processing with Abaqus/CAE: First Results

Abaqus/CAE provides several tools for Post Processing. Among these, there are several controls for displaying different variables, plotting their contours in different ways, controlling the maximum and minimum limits within the results, and plotting graphs that can show the evolution of…

Dassault Systemes Software: Graphics Card Not Part of a Certified Configuration Warning

September 20, 2016 If you are receiving a warning that informs you that you are using a graphics card which is not part of any certified configuration, there are two things that could be wrong: The Graphics Card itself is…

Analysis for Engineers: Fluid Validation in 3DEXPERIENCE (Part 1 of 2)

Hard core and pure Computational Fluid Dynamics (CFD) still remains one of the most complex fields within engineering. Yet, it is incredibly valuable, especially in a world where optimisation is becoming more necessary, not only for cost reduction but to make…

Analysis for Engineers: Fluid Validation in 3DEXPERIENCE (Part 2 of 2)

In part one you saw how to prepare a Fluid Validation analysis case. After running the simulation, the post-processing can be easily managed through the Results tab in the Action bars.

Installing Abaqus Subroutines

Arguably one of the most difficult steps in using User Subroutines in Abaqus is installing them correctly, and getting them to work! To help you overcome this first obstacle, we have produced a guide to walk you through the process.

Creating a new part in Abaqus/CAE

The most basic of operations can be intimidating to perform when you are a new user of a particular application, and one as established as SIMULIA Abaqus/CAE is no different! Creating a new part in Abaqus/CAE is easy, and the…

Analysis for Engineers: Structural Validation in 3DEXPERIENCE

Today, analysis is an essential part of any product development process. The use of simulation saves companies significant time and cost, by avoiding most of the expensive and lengthy physical testing process.

Use CATIA V5 FEA (GPS/GAS) more Efficiently by Creating Templates

It is becoming more common for designers to produce their own basic FEA analysis. This can be an intimidating task for a novice with little or no knowledge of FEA.

Using General Contact in Abaqus/CAE

Contact is essentially the definition of parts interacting with one another and/or itself. Abaqus/Standard & Abaqus/Explicit both use General contact and/or Contact pairs for defining contact.

SIMULIA Abaqus/CAE: Recording Macros

Abaqus/CAE allows the user to automate repeating tasks by running Python scripts, but writing these scripts from scratch can be difficult for first time users. To help you generate your scripts, Abaqus/CAE has a macro recording system, which allows the…

SIMULIA Abaqus 2016 Installation Guide

January 15, 2016 DOWNLOAD THE STEP-BY-STEP INSTALLATION GUIDE Some of you may be aware or even have been anticipating the arrival of SIMULIA 2016 suite of applications. Now that it is here, to get it up and running can be…

Importing Parts into Abaqus/CAE

There is more than one way to create geometry in Abaqus/CAE. The pre-processor (CAE) allows the user to create geometries, parts and assemblies, whether 1D, 2D or 3D. However very complex geometries could be time consuming using the pre-processer, and…

How do you design for manufacturing excellence in the world of Additive Manufacturing?

If you are one of the many businesses considering 3D Printing/Additive Manufacturing (AM), how can you ensure that your designs are right the first time, every time?

Buying a new CAD spec PC or laptop? Be careful with Windows 10 compatibility and Windows 7 downgrades

As suppliers of hardware to many of our customers, we regularly source new CAD workstations and laptops form a range of suppliers. After 18 months on the market (and a generally good reception), Windows 10 is now the standard operating…

Design Validation using CATIA Finite Element Analysis

CATIA V5 offers highly interactive finite element analysis capabilities for validating design.

Applying Boundary Conditions in Abaqus/CAE

It is possible to create boundary conditions in Abaqus/CAE and control how they take effect through different steps where we may be applying different load cases to a model.

Virtualisation of FLEXnet Licence Servers for SIMULIA

Many people ask if a License server can be hosted on a virtual machine (VM), known as virtualisation. Although Dassault Systemes do not encourage it, it is possible. Unfortunately for most, it will not fit requirements due to not all…

CATIA? DELMIA? EXALEAD? What do these brands actually mean? (In Layman’s terms)

One of the problems of Dassault Systèmes possessing such a wide variety of products is that it can often be a bit of an issue working out what each of these products even does.

3DEXPERIENCE and V5 Support on Windows 10 Operating System

Dassault Systèmes announces support of 3DEXPERIENCE and V5 Offers on Microsoft Windows 10 64-bit Edition operating system.

Make Your Designer Dreams Reality with Simulation

One of the toughest challenges a designer faces is to quickly determine whether an idea is viable or not. This is where a reliable simulation analysis tool can come in and save the day in a multitude of ways. If…

Design Optimisation using Tosca/Abaqus

Today’s engineers aspire to develop innovative products in the shortest development time possible. Security, comfort, performance, efficiency, durability, and flexibility are just some of the aspects to take into account. 

Make 2D & 3D Welding Simulation Easier using the Abaqus Welding Interface

Welding simulations are complex, requiring accurate representation of geometry, multiple weld passes, non-linear temperature dependent material properties, thermal and structural boundary conditions, and more. To capture all of these details, significant user effort is required.

How To Optimise Your Use of SIMULIA Abaqus Tokens

SIMULIA products are offered on an annual-lease token-based licensing using FLEXnet licensing utilities, which enables the user to monitor and manage how Abaqus software is used.

Extended Token Licensing within Abaqus 6.14

The new version of Abaqus 6.14 now supports the following products with Extended Token Licencing: Finite element analysis (Abaqus) Topology and shape optimisation (Tosca Structure) Fluid channel topology optimisation (Tosca Fluid) Durability and fatigue evaluation (fe-safe) Design-of-Experiments, parameter optimisation, and…